About Us

David Gammon |

Transcriptors was started in 1963 by the late David Gammon, The company was one of the World’s leading manufacturer of manual turntables, tone arms and accessories, and one of the most modern Hi Fi manufacturing plants in Europe during the 60’s, 70’s and the early 80’s. Many readers will be familiar with our turntables, which have been widely used in numerous television commercials, and in many films, including the classic 1971 film ‘A Clockwork Orange’ which used our 1964 Hydraulic Reference turntable in various scenes throughout the film. Our products have been copied and reproduced all over the world, from the ‘Concept 2000’ and the ‘Audio Linear’. Even today’s modern turntable design’s bear there origins to the striking designs that were designed by David Gammon, perhaps no better compliment could be paid to his famous turntables.

Sadly David passed away in December 2005 after a long battle with lung cancer..

England | 1960 – 1967

Employed by Almer Components as chief engineer that he designed the Transcriptor arm along with the sweep arm and stylus brush. These designs were born, due to the lack of professional devices that were manufactured by various audio companies

His friend Brian Allan (who was an architect) suggested to David that they should take some photographs and send them to Hi-fi News as a joke not thinking they would get published. He was amazed to find in their next issue that the pictures had been published. David started producing the Transcriptor Arm and the accessories part-time in his flat. It was not until he was approached by an audio research laboratory in the early months of 1963 , that he started production of the Reference turntable. The laboratory required a turntable that could meet the strict criteria required for highly accurate audio testing, and so the Reference turntable was designed. It was designed around the Transcriptor arm and was the most advanced turntable unit that had been produce at that time. He also designed a turntable unit for the then British audio company, Goodman’s.

In 1964 after leaving Almer Components, they offered him two room’s for thirty pound’s a week at Holloway Road, which were situated above the Almer Components premises, and with a small workforce of seven he started production on a full-time basis. However after a year, he out grew the premises, and moved to Theobald Street, Borehamwood.

England | 1967 – 1973

After moving to the new factory he was now in the position to increase turntable production. A year later this resulted in his next design, the Saturn. The table was produced alongside the Hydraulic turntable. In 1969 the late Stanley Kubrick visited David at his Borehamwood factory and asked him if he could purchase a Hydraulic Reference to use in his latest film project. He let Stanley have the turntable. The turntable made its appearance in the bedroom and hospital scene of the 1971 classic, A Clockwork Orange which starred the much acclaimed actor Malcolm McDowell. Various turntable parts were also used in another Stanley Kubrick production, 2001 A Space Odyssey. Other designs included display turntables for various department stores.

Clockwork Orange

A Clockwork Orange (1972)


X – Men First Class (2011)

Look Of Love

The Look Of Love (2013)

In 1971, David received an invitation from the London Design Center, to collect a design award for the Hydraulic Reference turntable. He received his award from the late HRH Princess Margaret at a lavish presentation evening. David was also present at many social events, which included hi-fi shows all over the world, even parties hosted by the Queen. Some of the last Hydraulic Reference turntables carry the design award logo which is located bottom left on the acrylic lid. He also received many other awards from all over the world, Japan and the former state of Yugoslavia

design_awardDavid Gammon and HRH Princess Margret. The Design Awards 1971.

Towards the end of 1973 the Irish government offered a purposed built factory which was ten times the size of the Borehamwood factory, and could manufacture all components in-house without the need to sub-contact work to other companies. This combination would also allow him to take turntable design even further.

England | 1973 – 1980

Relocating to Carlow Ireland. David sent his chief engineer Keith Weightmen to set up the factory in Ireland ready to carry on production of the Saturn until the middle of 1973. Due mainly to the oil shortage and the large cost of using acrylic as a material to manufacture turntables, he turned to glass. He drew a glass case and took it to the windscreen manufacture Triplex, and asked if it was possible to manufacture. They took a look a the design and said “no problem”. He had previously woke up in the early hours of the morning and said “Yes!, I’ve done it”. In eagerness to get his idea on paper, he sketched his idea on to the back of a Bensons & Hedges cigarette packet. The turntable was the Skeleton and featured the famous, but controversial, Vestigal tone arm, with it’s unique headshell design. Nobody could exactly understand how it worked but worked it did.

Instead of the conventional tone arm design, where the arm is pivoted at the rear, balanced by an extremely heavy counterbalance, the Vestigal tone arm was pivoted at the head shell allowing for a very small counterbalance and tracking force. In 1974, David moved his family to New York. Here he opened an office to satisfy the American market. No sooner than he got arrived, that he was overcome by orders for the Skeleton and also the Vestigal tone arm which was also sold as a separate.

As usual, hi-fi magazines, as well as the general public, were complaining about the scaling prices of hi-fi components. To answer this call, he took all the main components of the more expensive Skeleton, scaled it down and produced the Round Table. It featured a tone arm fitted to the lid, which allowed easy changing of the record. The turntable sold for twenty-five pounds. As with all Transcriptors products, it was well thought out and well-engineered turntable. Bear in mind, like all the other Transcriptor turntables, it used jewel pivot’s in its tone arm construction. However, for some strange reason, none of the complaining public bought the turntable, so only 300 were produced, and production lasted only for a year, which makes this particular turntable very rare and collectible.

J A Michell Engineering |

In the sixties and early seventies, J A Michell Engineering ran a small engineering business next to Transcriptors carrying out various contracts including work for the film industry. In the early days of Transcriptors, David contracted work to various engineering companies including J A Michell as he had no machine shop at the Borehamwood factory.

In 1973 when Transcriptors relocated to Carlow in Ireland, David and John signed a contract which was known as the ‘Technical Agreement’ which allowed, J A Michell Engineering to reproduce the Hydraulic Reference turntable under license. This was the first branded Michell turntable.

Design Concept |

David’s design concept was inspired by old clocks and watches from the 17th and 18th century. David had often asked this question many times over, why put something of engineering elegance into a black case or even worst, into a wooden case, that looked as if it had been made down in somebody’s garden shed. In fact Transcriptors started the trend to expose all the components so that they could be viewed from all angles. Manufactured from aluminum and acrylic to very high tolerances, tested, the end result always being a highly polished, highly accurate turntable. Designed and built with the skill of an 18th century clock maker, the turntables made for a very satisfying sight indeed.

Sounding Off |

The turntables have appeared in many films and TV commercials including the Kellogg’s cereal advertisement through to the Heartbeat TV series. They have also been reproduced not necessary legally, in one form or the other by companies from all over the world such as the Michell/Simon York Designs/Audio Linear even Concept2000 and Sykes & Hirsch, used the fluid arm on their Compacta.

 

Many famous people have had or still have a turntable. These celebrities have included the band members of super group Pink Floyd, Peter Noon of Herman’s Hermit’s, Royalty and also the late legendary record producer Mickie Most. The turntables have also been given as gifts to numerous museums such as the American Museum Of Modern Art New York, The Design Museum London, Pinakother Der Modern Munchen, Germany and even Japanese Museums, to name a few. He even supplied the Hydraulic reference turntable to SME in kit form, which they fitted their 3009 tone arm.